PARTS LIST:
FR 17-15 weldment ("A" version for regular hgt, "B" for low hgt) - 1 qty 1/4-20 x 2" long round head (from Anatomotor) - 1qty
1/4" washer - 1 qty
1/4-20 steel nut (w/nylon) - 1 qty
INSTRUCTIONS:
- Grind or file enough residual weld off the vertical tube to enable the new bracket to slide onto the end of the square tube.
- Mark and drill a 1/4" hole through the vertical square tube.
- Use the enclosed bolt to secure the new bracket.
